Monitoring wheat phenology and irrigation in Central Morocco: On the use of relationships between evapotranspiration,crops coefficients,leaf area index and remotely-sensed vegetation indices

The monitoring of crop production and irrigation at a regional scale can be based on the use of ecosystem process models and remote sensing data. The former simulate the time courses of the main biophysical variables which affect crop photosynthesis and water consumption at a fine time step (hourly or daily); the latter allows to provide the spatial distribution of these variables over a region of interest at a time span from 10 days to a month. In this context, this study investigates the feasibility of using the normalised difference vegetation index (NDVI) derived from remote sensing data to provide indirect estimates of: (1) the leaf area index (LAI), which is a key-variable of many crop process models; and (2) crop coefficients, which represent the ratio of actual (AET) to reference (ET₀) evapotranspiration.A first analysis is performed based on a dataset collected at field in an irrigated area of the Haouz plain (region of Marrakesh, Central Morocco) during the 2002–2003 agricultural season. The seasonal courses of NDVI, LAI, AET and ET₀ have been compared, then crop coefficients have been calculated using a method that allows roughly to separate soil evaporation from plant transpiration. This allows to compute the crop basal coefficient (K_cb) restricted to the plant transpiration process. Finally, three relationships have been established. The relationships between LAI and NDVI as well as between LAI and K_cb were found both exponential, with associated errors of 30% and 15%, respectively. Because the NDVI saturates at high LAI values (>4), the use of remotely-sensed data results in poor accuracy of LAI estimates for well-developed canopies. However, this inaccuracy was not found critical for transpiration estimates since AET appears limited to ET₀ for well-developed canopies. As a consequence, the relationship between NDVI and K_cb was found linear and of good accuracy (15%).Based on these relationships, maps of LAI and transpiration requirements have been derived from two Landsat7-ETM+ images acquired at the beginning and the middle of the agricultural season. These maps show the space and time variability in crop development and water requirements over a 3 km × 3 km irrigated area that surrounds the fields of study. They may give an indication on how the water should be distributed over the area of interest in order to improve the efficiency of irrigation. The availability, in the near future, of Earth Observation Systems designed to provide both high spatial resolution (10 m) and frequent revisit (day) would make it feasible to set up such approaches for the operational monitoring of crop phenology and irrigation at a regional scale.     

Nitrogen and water management can limit premature ripening of sunflower induced by Phoma macdonaldii

Premature ripening (PR) is one of the most important diseases of sunflower in France since the 90s. Previous results indicated that girdling canker of the stem base, caused by Phoma macdonaldii was its primary cause but elucidation of critical environmental factors involved is crucial for better control of the disease. A field study was conducted in three contrasting cropping seasons (2006–2008) and investigated the effect of N fertilization (0, 75 and 150 kg N ha^?1) and water regime (rainfed, irrigated) on two cultivars with artificial inoculation (AI) and natural infection (NI). Disease assessment was recorded weekly to calculate the area under disease progress curve (AUDPC) and the final percentage of PR plants. Data showed that high levels of N fertilization led to significantly (P < 0.05) more PR than non-fertilization. Water deficit conditions were significantly (P < 0.05) involved in disease severity, and AUDPC and PR were increased when dry conditions were associated with high N supply. This was true for two cultivars which differed in their susceptibility to the disease but cv. Heliasol RM was significantly (P < 0.05) more affected than cv. Melody, partially resistant to PR. Despite contrasting weather patterns, these results demonstrated a clear role of crop management and environmental conditions on the incidence and severity of stem base attacks responsible for the PR syndrome. These findings suggest that sunflower crop husbandry should be adapted to minimize premature ripening induced by P. macdonaldii.     

Diversity of methodologies to experiment Integrated Pest Management in arable cropping systems: Analysis and reflections based on a European network

Integrated Pest Management (IPM) aims to promote physical and biological regulation strategies that help farmers contain populations of pests (pathogens, animal pests and weeds) and to finally reduce the reliance on pesticides. It is based on the holistic combination of multiple management measures rather than on the sum of single methods, each of them having only small effects on pests reduction. Thus, to analyse the interactions between IPM measures and to evaluate the sustainability of their implementation, we require an approach considering the whole cropping system (CS), i.e. a functional entity whose complexity is more than the sum of its parts. A network of European experiments at the CS level was set up recently, and aimed at sharing data and expertise to enhance knowledge of IPM. Comparison of existing methodologies highlighted a diversity of CS designs and experimental layouts. We deduced that the concept of CS itself was viewed differently among scientists, and this affected experimental protocols. Other differences were related to the research context and objectives. Some experiments aimed to explore very innovative strategies and generated knowledge on both their effects on the agroecosystem and their ability to satisfy a set of performance targets, while others aimed to provide quickly adoptable solutions for local farmers in line with the current socio-economic constraints. In some research programmes, the experiment was part of the CS design process — and tested CS were regularly revised based on an continuous improvement loop — while in other cases CS were kept stable across years so as to enable the evaluation of their long-term cumulative effects. A critical aspect contributing to the diversity among CS experiments was the distinction between a factorial design of experimental CS and systemic approaches: factorial experiments allowed quantification of the effects of each IPM component regardless of the consistency between components defining the CS. In contrast, systemic approaches focused on the overall evaluation of CS designed with consideration of their consistency, hence maximising their ability to meet the objectives. Because CS experiments represent a huge investment in terms of economics and time, preliminary reflections of the relevance of the experimental strategy is of critical importance.     

The influence of wax-sizing on dimension stability and mechanical properties of bagasse particleboard

Bagasse particleboards (BPBs) were made using polymeric methylene diphenyl diisocyanate (pMDI) resin as binder and wax emulsion as dimension stabilizer. A factorial experiment was conducted to measure the effects of wax and pMDI resin content on particleboard dimension stability and mechanical properties. The data were compared with respective properties specified in the ANSI A208.1 standard for commercial M3 grade wood-based particleboard.Wax-sizing improved the linear expansion (LE) of the particleboards under both pMDI resin contents used in this research and all LE values were controlled under the critical value of 0.35%. The use of wax significantly reduced 24-h water absorption and thickness swelling compared to the control panels without wax. Wax-sizing at the moderate levels also showed positive influence on long-term water absorption and thickness swelling properties. Wax content levels, however, did not significantly influence water absorption and thickness swelling behavior. Wax-sizing had no evident negative effects on the bending properties of MDI-bonded bagasse particleboards under both resin contents, while it caused slightly negative effect on internal bond strength. Mechanical properties of all boards far exceeded the minimum values specified in ANSI A208.1 standard. The entire properties of the 5% pMDI BPBs were better than those of the 3% pMDI panels as expected.     

Properties of dry film lubricants prepared by spray application of aqueous starch–oil composites

Aqueous dispersions of starch–soybean oil (SBO) and starch–jojoba oil (JO) composites, prepared by excess steam jet cooking, form effective dry film lubricants when applied as thick coatings to metal surfaces by a doctor blade. This application method necessitates long drying times, is wasteful, requires the addition of sucrose to promote composite adhesion to the metal surface, and restricts the substrate geometry to planar surfaces. These issues represent important barriers to the commercialization of this aqueous biobased dry film lubricant technology. We now report an air-assisted spray method that uses readily available spray equipment to apply aqueous starch–oil composite dispersions as thin coatings (0.15–2.0 mg/cm²) to metal surfaces quickly and efficiently. Aqueous dispersions of waxy maize starch–oil composites containing either SBO, JO or hexadecane (HD), having 0.020–31.7 wt% oil relative to starch, were applied by air-assisted spraying and could be dried to the touch in approximately 30 s. Additionally, sucrose was found unnecessary for adhesion of the sprayed coatings. Tribological ball-on-flat testing of metal specimens spray coated with starch–SBO, –JO, and –HD composites showed the thin films of starch–SBO and –JO performed better at reducing the coefficient of friction (COF) than the starch–hexadecane composites. A low COF ranging between 0.027 and 0.044 was obtained for the starch–SBO and –JO composites containing 4–5 wt% oil relative to starch. Above 4–5 wt% oil loadings, no further COF reductions were realized. Further results revealed that micrometer-sized oil droplets embedded within the dried starch matrix of the composite film are delivered “on demand”. It appears that when pressure is applied to the dry film lubricant, the starch matrix ruptures and releases the entrained oil to the friction surface.     

Puppy behavior at the veterinary clinic: A pilot study

New owners usually have many questions regarding their puppy’s behavior during the first physical examination. The aim of this pilot study was to investigate the behaviors expressed by puppies when exposed to a veterinary clinic environment. The puppies’ response to physical examination was also studied. A total of 102 puppies, between 8 and 16 weeks of age and of various breeds, were filmed during a standardized physical examination at the veterinary clinic. The study included an observation of the puppy free on the floor (FF) followed by a physical examination on a table (PET) and various manipulations on the floor (MF). During FF, the behavioral categories recorded were: activity, exploration, facial expression, puppy solicitation of interaction with the veterinarian, vocalization, and others. During PET and MF, the type of interaction with the veterinarian, facial expression, and ear position were examined. The study revealed some significant differences between behaviors exhibited by puppies according to their sex, age, and estimated adult weight. Behaviors generally varied widely among puppies, but some individuals showed “extreme behaviors” (outliers) compared to the median puppy. These behaviors included more active avoidance, more locomotion, more panting, or more vocalization, which were often correlated across contexts. These findings suggest that even at a young age, some puppies can be differentiated from others by specific behaviors. Whether or not these individuals are at higher risk of developing behavioral disorders as adults remains to be investigated.     

Evaluation of a pneumatic drop-on-demand generator for application of agrochemical solutions

A simple and robust monodroplet generator was constructed for drop-on-demand application of aqueous solutions of pesticides to crop plants and weeds. A short current impulse regulated the opening of a solenoid valve, allowing pressurised nitrogen gas to flow into a liquid chamber. Once a jet is released from the nozzle, one single droplet is detached, and the remaining part is retracted back into the cylinder as the excess gas is exhausted. The effects of the impulse width, pressure, diameter of the orifice, and the surface tension of the liquids as influenced by adjuvants were evaluated in terms of droplet diameter and generation potentiality. In general, increasing the impulse width and orifice diameter led to an increase in the droplet diameter. In contrast, increased pressure and reduced surface tension of the liquid led to a decreased diameter, although the effect was observed only at lower impulse widths and larger orifice diameters. With an optimum adjustment, we were able to generate monodroplets with diameters ranging from 533 to 1819 μm, although the range could be varied easily by changing the parameters.     

Gallbladder motility in sheep: effects of cholecystokinin and related peptides

Gallbladder motility was recorded as tonic and small amplitude (rhythmic) contractions in conscious sheep fitted with miniaturized strain-gauge force transducers located in the corpus and fundus. Nichrome wire electrodes were chronically implanted in the gastroduodenal area. Both tonic and superimposed rhythmic gallbladder contractions were increased during feeding. They decreased during the periodic phases of antroduodenal quiescence. The excitatory effects on gallbladder and antroduodenal motility were mimicked by pilocarpine and blocked by atropine. Cholecystokinin (CCK-OP) and caerulein elicited motor responses of the gallbladder in a dose-related manner without antroduodenal stimulation. In contrast, pentagastrin induced gallbladder motor responses with concomitant stimulation of the antroduodenal area. The results suggest that feeding may act to trigger gallbladder motor activity through a mechanism related to the increased antroduodenal activity. Direct effects of CCK-OP and caerulein confirm that gallbladder motor function is also mediated through specific receptor sites.